8. Setting Mode Menu
8.1 Vehicle Selection
7.6 Screen ON
Press any button to wake the LED display, the LED display will also light up when a tire alarm occurs.
14
English
The receiver supports parameter settings for up to three vehicles, follow the procedure below to configure
the relative parameters for each vehicle.
1. Vehicle Selection
2. Setting Tire Pressure Unit
3. Setting Tire Temperature Unit
4. Setting the Number of Axles to Receiver
5. Setting Tire Position on the Receiver
6. Tire Sensor ID Pairing to the Receiver
The receiver can store the ID sensors of up to 3 vehicles. Vehicle Selection enables you to view,
set, or modify the TPMS settings of a specific vehicle. The first step is to select the vehicle that
you would like to setup.
In Driving Mode, Hold for 3 seconds for Vehicle Selection.
At any time, hold for another 3 seconds to switch back to Driving Mode.
