8.5 Setting the Tire Position on the Receiver
18
English
OK
OK
OK
OK
1
6
2
5
3
4
8.5.1 The numbered tire position for each tire sensor is shown on the receiver as pictured below.
8.5.2
8.5.3 Press to enter tire position rotation mode, digit 1 at the LF position will blink by default. Then
press to select the original tire position which needs to be changed and then press again,
and the digit at that selected position will turn green. If no change is made in this mode for 60
seconds, the receiver will beep to warn that setting has not been completed successfully.
8.5.4 Then press to select the new position to which you want to move the previously selected
position, and press to confirm, the digit at the new position will also turn green.
8.5.5 The digits at both exchanged positions will remain displayed in green for 3 seconds to show which
2 tires are exchanged. Then the chosen digits will automatically turn back to red.
8.5.6 Then the screen will show the new positions. If you need to exchange more than one pair of tires,
press to repeat the procedure.
