strana
28
debris from entry.
4
.
Replace the carbon brush when the carbon
brush is worn out in certain length and motor
stops running. All maintenance should be
carried Out by Authorized Service Center,
and only use identical repair parts.
5
.
All service MUST only be performed by
Authorized Service Center. ALWAYS use
only accessories that are recommended for
this tool.
6
.
Cleaning. Avoid the use of plastic cracks
caused by damage to the solvent. Use clean
cloths and mild soap to remove dirt, dust, etc.
WARNING:
Do not allow the water entering
the motor and the tool full immersed in the
ware, which will result in motor malfunction and
electric shock.
ENVIRONMENT PROTECTION
1
.
Tool, accessories and packaging should be
sorted for environment-friendly recycling.
2
.
Power tools and accessories at the end of
their service life still contain large amounts
of valuable raw materials and plastics which
can likewise be fed back into a recycling
process.
3
.
Some dust created by working contains
harmful chemicals must be collected by
special garbage re- cycle site.
SERVICE
1
.
In case of guarantee, repair or purchase
of replacement parts, always contact the
qualified service cente
r. And supplied with
the efficient service card and invoice.
2
.
It is without the scope of guarantee when
the tool was normal wear, overload or
improper use of damage.
Problem Shooting
Problems
Reasons
Ways to Solve
The Problems
The drill
does not
work
Battery is
depleted
Charge the
battery
Bit cannot
be installed
Sleeve is not
released
Release the
sleeve
Motor
overheating
Be sure cooling
vents are free
from saw dust
and obstacles
Clean, clear
vents. Do not
cover with hand
during operation
- 8 -
