18
ON DEMAND WEIGHT RELEASE PROCEDURE (BCJ-1800)
(Fig. 55)
(Fig. 54)
(Fig. 53)
1. Securely grab hold of the weight release knob as in the photograph. (Fig. 53)
2. When you pull on the knob forcefully, the Hook and Loop fastener of the cartridge
closure cover peel apart. (Fig. 54)
3. Pull on the knob further to pull out of the weight cartridge. (Fig. 55)
*“NON RELEASABLE” EXTRA POCKETS (ex. BCJ-8000C, BC0501)
(Fig. 56)
WARNING : With the B.C.J. deflated completely, and no additional weights attached,
the amount of weight in the non-releasable weight pockets MUST not cause you to
sink from the surface of the water.
ALWAYS consult with your dive instructor on the use of the non-releasable pockets
for additional weights.
ALWAYS notify your divemaster and dive buddy on the use of your non-releasable
pockets.
Two non-releasable not zippered pockets are located in the rear of
the B.C.J. (Fig. 56)
These pockets may be used for additional weights. However,
please note that these pockets CANNOT be reached by the diver
him/herself to release the weights. Please refer to the warning
listed below for further details.
