6
(Fig. 1)
Attach the “Low
Pressure Quick
Disconnect Hose”
to the inflator plug.
(Fig. 2)
Secure the airway
together with QD
Hose to the Hock &
Loop hose retainer.
To Your B.C.J. (Fig. 1)
Connect QD Hose Inflator by pulling Quick-Disconnect Collar back with thumb and
forefinger, while pushing Hose Coupling onto Inflator Plug. Release Collar when
Coupling is engaged fully. Pull gently but firmly on Hose to check if Coupling is
securely joined to Plug. To disconnect Inflation Hose from Inflator, pull Quick-
Disconnect Collar back and disengage Coupling from Plug
Setting the low pressure hose (APA type)
Connect the plug for the
coupler for the regulator BCJ
low pressure hose, then fit in
the low pressure hose in the
groove on the side of the
inflator hose as in Figure. 3
and 4. This arranges the
hose neatly and makes it
easier to handle and makes it
easier to mount and remove
the BCJ.
(Fig. 3)
(Fig. 4)
Of course, normal exhaust operations
and use of the Rapid Exhaust
Deflation by pulling the APA inflator
main unit are both possible. When
primarily using the rapid exhaust
function with the APA exhaust button,
there is also an APA inflator setting
position that uses the BCJ hose
holder to fasten with the APA exhaust
button right at hand. (Fig. 6)
Inflator setting position (APA type)
The recommended APA inflator setting position is the same as for a regular inflator.
(Fig. 5)
(Fig. 5)
(Fig. 6)
