Turtle Beach Ear Force AK-R8, Руководство пользователя

Страница: 38 / 61

www.Turtle-Beach.com
Page 34
Control Panel Speakers Tab
The Speakers Tab is divided into the following sections:
ƒ
The Speaker Configuration section lets you test speaker operation and select speaker
configuration modes.
ƒ The Volume section lets you set the master volume and individual speaker volumes.
ƒ
The Settings Summary section shows the status of important control panel settings.
ƒ
The S/PDIF Settings section lets you configure the digital output.
Speaker Options Button
The Speaker Options button, located to the right of the
speaker configuration pull-down menu, is active only in 4,
5.1, and 7.1 channel speaker configurations. Clicking this
button activates a dialog box with the following settings:
ƒ
Multi-channel to Subwoofer: When this option is
checked, a sub-mix of all channels is sent to the Sub-
woofer output. This feature should be enabled when
listening to a stereo source with multi-speakers so the
bass signals from the stereo source will be routed to the
sub output.
ƒ
Center/Bass Swap : When this option is checked, the Center and Bass output channels
are swapped. This feature is useful when using 5.1 and 7.1 speaker systems with
center/sub stereo jacks that do not match the configuration on the center/sub output
jack.
ƒ
Surround/Rear Output Swap : (Available only in 7.1 Speaker configuration) When this
option is checked, the Surround and Rear L/R speaker channels are swapped.
ƒ Headphone Output: This pull-down menu selects the speaker signals routed to the
headphone output. Normally, this is set to Front Channels. However, in 7.1 speaker
mode, this is set to channels 7 & 8, allowing the headphone output to be used as the rear
channel output in a 7.1 speaker configuration.