55
mWing
Installation and mounting
After completion of the finished floor – mounting mWing
Requirements
›
The finished floor is finished.
›
The nuts fixing the base plate have been removed.
3
2
1
3
2
1
Mag0
111
4
Fig. 25: FlowMotion base plate in the finished floor
1 Finished floor
2 FlowMotion base plate, flush with finished floor
3 Threaded rods
5/16" dia x 13.0" long (
M8 x 330
)
, stainless steel, (8 x)
1.
Cut
off the threaded rods
0.8"
above the finished floor
(angle grinder)
Mag0
111
5
Fig. 26: Flexing off threaded rods
2. Place the mWing on the threaded rods.
3. Mount the mWing with washers and nuts.
4. Tighten the nuts slightly.
www.TURNSTILES.us | [email protected] | 303-670-1099
