power and functioning correctly
.
We suggest strongly to use the battery in enough power . Or it is possible to damage
battery and protect in advance owing to the incorrect judgement .
4. Plane Mode
：
：
：
：
Normal plane(Normal) /Helicopter mode 1(Soft) /Helicopter mode 2
(Super-Soft+Govener Mode),
Normal plane mode(option4-1)
：
：
：
：
suitable for normal plane and clouds fly.
Helicopter mode1(option4-2):
Have the soft start function,suitable for Normal,Idle1,Idle2 etc flying mode.when change to
Idel1or Idel2 mode,if the higher RPM make the gyroscopes have slight trace,for this
moment should be down the sensitivity of gyroscopes.
Helicopter mode 2(option4-3)with Soft+Governor Mode),
suitable for for stunt flying of Idle1,Idle2 (not suitable for Normal Flying mode).Choose
Governor mode function ,throttle speed should be between 75%-85%.If the higher RPM
make the gyroscopes have slight trace,it should be bring down the Sensitivity of
gyroscopes.Because of the lacking RPM(gear matches improper),the poor performance of
battery,the sensitivity of the gyroscopes setting improper or pitch setting wrong,all of this
will influence the function of the Governor,even cause the tail deflection,so choose this
mode should be recognized for the related condition.
5.Throttle response speed setting:Normal/Medium/ High
Default is Normal,this function is according to flying features of users' to adjust properly
.Fox exmple.3D plane and violent 3D helicopter suitable for Medium or High speed,made
the motion more quicker and flexible.But pay attention when you improve throttle response
speed,the voltage and electric power consumption will be increased.
Other functions:
Start protection function:
ESC checked the throttle haven't seted the bottom position when starting,motor can't go
work to avoid turning injure.
Over-heat protection:
When radiate environment of ESC is bad or continuous heavy service result in the
temperature have decreased to 100 degree,ESC will start the Over-heat protection and let
motion cut intermittently.In order to the ESC reached a best efficiency ,we proposal install
the ESC to cross-ventilation position of the cabin.
Function setting mode:
1.Entering setting mode:
Confirm the ESC connection is ok,start the transmitters and move the throttle to the top
position,then connection the power.At this moment ,the ESC entering to the setting,the
motor will emit “
♪
1 2 3”------ “
♪
1 2 3 4 5”(it means enter into the setting)------“dong dong
dong”(it means the top position of the throttle is confirmed).Put the throttle to the bottom
position ,then can hear again the tone of “dong dong dong”(it means the bottom position
of the throttle is confirmed).At this moment,the throttle setting have finished and enter
intofunctions setting.
2.Setting mode option:
The tone of etering function setting mode is 1-5tims (Dong),after 5times is the confirmed
tone
4
