Cut off the power ,the throttle range have finished the setting
“
ding---ding---ding
”
confirm tone of the bottom position of throttle
Move the throttle stick to the bottom position,wait for 2 seconds.
Cut off the power of ESC after confirm the ESC connection and working is normal,keep the
transmitters start and move the throttle stick to the top position.
Connection the power of ESC,the motor will emit “
♪
1 2 3”------ “
♪
1 2 3 4 5”(it means enter
into the setting)------“dong dong dong”(it means the top position of the throttle signal is
confirmed).Put the throttle to the bottom position and wait 2 seconds,then can hear again
the tone of “dong dong dong”(it means the bottom position of the throttle signal is
confirmed).At this moment,cut off the power ,the throttle setting have finished.
If haven't cut off the power,it will continue to enter other functions .
After cut off the power of ESC and put the throttle to the bottom position ,the ESC
connection the power again,it means the ESC enter into the normal use.
Menu
1. Brake Setting
：
：
：
：
off/soft/hard
2.Timing
：
：
：
：
Low / Medium / High
Setting is according to poles of motor.Low timing value for 2 poles motor,For higher
speed ,Medium timing value be chosen.Medium timing value for motors with more than
6 poles to get a high efficiency. For higher speed, High timing value can be chosen.When
revision timing,it will cause current increase and ESC fever etc,pay much attention to the
change of current value,avoid current overload,influence the life of motor and ESC.
3.Battery Protection Voltage Threshold(Cut-Off Threshold)
：
：
：
：
High /
Medium
Default is Medium (suitable for Cell discharge);this function can calculate automatically
the number of battery cells (7.4-16.8V) and protection the discharge.Avoid to broken
battery of discharge voltage too lower.
High cut-off threshold:first stage is 3.2V/1cell;second stage is 3V/1cell
Medium cut-off threshold:first stage is 3V/1cell;second stage is 2.8V/1cell
A-Li-Ion/Li-Po High:when single voltage of Li-Po down to 3.2V,coming into the first stage
production,motion will discontinue indirection,for this moment,user should throttle down
and ready to land.when single voltage of Li-Po down to 2.9V,coming into the second stage
production,full restriction the motion output.(Attn:Only in 4-1 option , the normal Fixed-wing
will be start the second stage protection).
When enter into the first stage,operator should land the plane in time,avoid the battery
discharge in heavy and damage the battery.
Ex:when use 11.1V 3cell Li-po battery,the voltage protection should set High cut-off
threshold.
11.1V Li-po battery ,the full charged is 12.6V,the ESC is regarded as 3cells Li-po battery.
Enter into the first stage protection voltage is 3.2V
ⅹ
3cell=9.6V ;
the second stage protection voltage is 2.9V
ⅹ
3cell=8.7V
When the voltage down to 9.6V,motion will discontinue indirection,when the voltage down
to 8.7V,full restriction the motion output.
Attn
:Above functions are suitable only to the Lithium Batteries with enough
3
