TurfEx TS-50, Руководство пользователя и инструкции по установке

Страница: 15 / 16

Lit. No. 76736, Rev. 00 15 July 1, 2020
HELPFUL HINTS:
• If your spreader does not spread evenly, be sure
that the FRONT on the gearbox points to the front
of the spreader. The impeller must turn clockwise.
Reversing the gearbox will cause the impeller to
turn counterclockwise. Clean the impeller after
each use. Some fertilizer may become stuck on
the impeller blades and cause uneven spreading.
• Your spreader is designed to be pushed at 3 mph,
which is a brisk walking speed. Slower or faster
speeds will change the spread patterns.
• Wet fertilizer will also change the spread pattern
and fl ow rate. Clean and dry your spreader
thoroughly after each use. To prevent rust,
coat all metal surfaces, and inside tubes where
possible, with a light oil or multi-use lubricant.
Wash between the shut-o
ff plate and bottom of the
hopper.
• Gears are permanently lubricated at the factory.
Do not open the gearbox or dirt may enter the
gearbox.
• If you must use rock salt, remove the agitator to
prevent damage to the gearbox and remove salt
from the hopper on a daily basis. Rock salt will
reconstitute back into a solid block overnight with
humidity and will damage the spreader.
ACCESSORIES AND SERVICE PARTS
Accessories and spare parts may be ordered direct
from the authorized dealer. Provide the following
information when placing an order:
• Model Number
• Part Number
• Part Description
For questions regarding the operation or assembly
of your spreader, or to order accessories and repair
parts, please contact your authorized dealer.
TROUBLESHOOTING, ACCESSORIES & SERVICE PARTS
SPREADING TIPS
• Use care when operating spreader near
pedestrians.
• Calculate spread pattern when near vegetation.
• For a wider pass, increase walking pace.
• For a heavier pass, walk slower.