TurfEx TS-50, Руководство пользователя и инструкции по установке

Страница: 13 / 16

Lit. No. 76736, Rev. 00 13 July 1, 2020
ESTABLISHING A SETTING RATE
1. Divide the bag weight by the listed coverage of the bag to give the suggested rate in lb/1,000 ft 2 .
Example: 37 lb/10,000 ft
2
= .0037
Then multiply by 1,000: .0037 x 1,000 = 3.7 lb/1,000 ft
2
2. Find the closest lb/1,000 ft 2 in the Broadcast Setting Matrix below, based on the material particle size.
Example: 2 lb/1,000 ft
2
= Spreader Setting of 10, 13, or 18 based on particle size.
Then multiply by 1,000: .0037 x 1,000 = 3.7 lb/1,000 ft
2
SETTING A RATE, CALIBRATION, AND SPREAD PATH
NOTE: The settings furnished in the Setting Matrix are intended as a guide only. Variations in physical
characteristics of material applied, walking speed, and roughness of ground surface may require
slightly di
ff erent spreader settings. Due to these conditions, TrynEx
®
International, LLC, makes no
warranty as to the uniformity of coverage actually obtained from the settings listed.
CALIBRATION INFORMATION
Calibration
Start by ensuring that the spreader calibration is
correct. Make sure that the drop holes are fully open
when the rate control lever is on 30. If not, adjust the
control rod at the pivot bracket to allow for fully-open
hopper holes with the control lever at position 30.
Deflector-Free Control
Partial Pattern
FULL Rate
(one pass)
HALF Rate
(two passes)
SPREAD PATH
SIDEWALK
Does not change the setting rate.
FLOWER
BED
FLOWER
BED
DRIVEWAY