TurfEx TS-50, Руководство пользователя и инструкции по установке

Страница: 12 / 16

Lit. No. 76736, Rev. 00 12 July 1, 2020
OPERATING INSTRUCTIONS
1. Before fi lling the hopper, become familiar with the
operation of this spreader.
2. Obtain the proper setting for the material to be
used from the Broadcast Spreader Setting Matrix
section of this manual, or from our website under
the Product Info > Owner's Manuals section.
3. Move the stop bolt on the rate gauge assembly to
the proper setting.
4. While pushing the spreader forward, pull the
control lever back to the stop bolt.
5. To stop spreading, push the lever forward to close
the fl ow holes before you stop moving.
6. When fi nished, empty any remaining material from
the hopper.
7. Thoroughly wash the spreader and allow it to
dry before storing. A coating of light oil will help
prevent corrosion.
8. If you use rock salt, remove the agitator to prevent
damage to the gearbox.
DEFLECTOR-FREE CONTROL
OPERATION
The de fl ector-free control feature is a new innovation
that eliminates the need to use a side de fl ector. Side
de fl ectors can adversely a ff ect your application rate,
and prevent material from being spread into fl ower
beds, on sidewalks, or driveways.
The de fl ector-free control maintains the correct
application rate while it is activated, giving you
excellent results in seeding or spreading while
controlling the spread pattern on the left side of the
spreader.
The de fl ector-free control lever is located on the back
of the hopper at the bottom.
To operate, slide the control lever from the left to the
right. This will activate the de
fl ector-free control for a
partial spread pattern and will prevent material from
being spread to the left side of the spreader.
Position the left wheel of your spreader 12"–16" from
the sidewalk,
fl ower bed, or driveway, and spread as
normal. When you have completed this spreading
pass, open the de
fl ector-free control by sliding the
control lever from right to left, for a full-spread pattern.
OPERATING INSTRUCTIONS