Turf Tick Products UNIVERSAL AUTOSTACKER, Оригинальное руководство пользователя

Страница: 4 / 26

3
2. Autoseer: one control unit
The Universal Autostacker uses 1 control unit for Autosteer. This control unit differs from the
regular Turftick (with hand stacking) in terms of hardware (different sensors) and software.
The control unit interacts between Autosteer shoe, right front wheel, trailer wheels and the
main operating box. This Autosteer system has been used on the later Universal Autostackers
which have 2 steered trailer wheels (except SN: 1023 & 1025).
Overview components
*Shoe sensor: Placed on the Turftick
Measures angle position of shoe only while Autosteer is switched ‘ON’
(while harvesting sods on the field).
*Wheel sensor:
Placed on right tractor wheel
Measures angle position of right tractor wheel.
*Valves tractor:
Placed under the Tractor cabin (usually on right side)
When Autosteer is switched ‘ON’, this steering valve will steer tractor
wheels based on Shoe sensor position. These valves are engaged only
while driving on the field when the machine has to follow the sod edge
(position of shoe sensor).
*Control box:
Placed inside the tractor cabin
The user can switch on/off the Autosteer and adjust ‘Offset’ value. This
‘Offset’ value adjusts the sod strip left behind on the field.
*Fusebox:
Placed under the bonnet of tractor
Power supply for Autosteer control unit.
Valves Tractor
Shoe sensor
Control box
Wheel sensor
(right side)
fusebox