turck TBEN-L Series, Инструкция по эксплуатации

Страница: 112 / 126

Operating
Using the USB host port
112
Hans Turck GmbH & Co. KG | T +49 208 4952-0 | F +49 208 4952-264 | more@turck.com | www.turck.com
Perform firmware update (function FW_UPDATE)
„
Create the folder FW_UPDATE on a USB stick.
„ Store the firmware as bin file in the folder FW_UPDATE.
„ Insert the USB stick into the device.
a The RUN-LED flashes green with 0.5 Hz.
„ Press the SET-button within the next 30 seconds for at least 3 seconds.
a The RUN LED flashes in the sequence 3 × green - pause (1 Hz) - 3 × green - pause (1 Hz)
- ....
a The data is loaded into the device.
a
When the RUN LED blinks orange at 1 Hz, the firmware update is complete.
„
Remove the USB stick.
„
Execute a power cycle.
a The device restarts.
Write user data to the device (function USB_DATA_WRITE)
„ Insert the USB stick with the USB_DATA_WRITE folder into the device.
a
The RUN-LED flashes green with 0.5 Hz.
„
Press the SET-button within the next 30 seconds for at least 3 seconds.
a
The RUN-LED flashes green with 2 Hz.
a The data are stored to the device.
a When the RUN LED blinks orange at 1 Hz, the data has been successfully saved.
„ Remove the USB stick.
a The device restarts.