manualshive.com logo in svg

turck RU130U-M18/3GD Series, Руководство по эксплуатации, Страница: 5 / 46

Поделиться
Скачать
turck RU130U-M18/3GD Series Скачать руководство пользователя страница 5

5 

V01.01 | 2016/10 

1 

About these instructions

These operating instructions describe the structure, functions and the use of the product, and 

will help you to operate the product as intended. Read these instructions carefully before using 

the product. This is to avoid possible damages to persons, property or the device. Retain the in-

structions for future use during the service life of the product. If the product is passed on, pass 

on these instructions as well.

1.1 

Target groups

These instructions are aimed at qualified personnel with knowledge in the field of explosion 

hazard protection (EN 60079-14, etc.) and must be carefully read by anyone mounting, commis-

sioning, operating, maintaining, dismantling or disposing of the device.

1.2 

Explanation of symbols

The following symbols are used in these instructions:

 DANGER

DANGER indicates an imminently hazardous situation with a high risk of death or seri-

ous injury if it is not prevented.

 WARNING

WARNING indicates a potentially dangerous situation with medium risk of death or 

severe injury if not avoided.

 CAUTION

CAUTION indicates a situation that may result in damage to property if it is not 

prevented.

 NOTE

NOTE indicates tips, recommendations and important information. The notes contain 

information, particular operating steps that facilitate work and possibly help to avoid 

additional work resulting from incorrect procedures.

➤

 

CALL TO ACTION

This symbol identifies steps that the user has to perform.

➥

 

ACTION RESULT

This symbol identifies relevant results of actions and action sequences.

1.3 

Additional documents

You will find the following supplementary documents online at 

www.turck.com

:

 

■

Data sheet

 

■

Quick start guide

 

■

IO-Link devices commissioning manual

 

■

Device approvals

The most important data from the EC-type examination certificate are listed on P. 37. All valid 

national and international approvals are available via the Internet.

The IECEx Certificate of Conformity (IECEx CoC) can be found at 

www.iecex.com

. Further infor-

mation on explosion protection is available on request.

Содержание RU130U-M18/3GD Series















































Отзывы:

Нет отзывов