turck RU130U-M18/3GD Series, Руководство по эксплуатации, Страница: 29 / 46

29
V01.01 | 2016/10
9.2 Setting via manual bridging (short-circuit)
Select output
➤ ➤
Select switching output 1: Bridge pin 3 (BU) with pin 5 (GY) for 2...7 s.
➤ ➤
Select output 2: Bridge pin 3 (BU) with pin 5 (GY) for 8...13 s.
Set the switching point
➤ ➤
Select the switching output.
➤ ➤
Place the object for the switching point accordingly.
➤ ➤
Store the switching point: Bridge pin 3 (BU) with pin 5 (GY) for 2...7 s.
➤ ➥
The switching point has been taught in successfully if the green LED flashes for 1.5 s at a
frequency of 5 Hz.
Window function — setting the switching range
➤ ➤
Position the object for the 1st switching point.
➤ ➤
Select the switching output.
➤ ➤
Store the 1st Store the switching point: Bridge pin 3 (BU) with pin 5 (GY) for 8...13 s.
➤ ➤
Position the object for the 2nd switching point.
➤ ➤
Store the 2nd Store the switching point: Bridge pin 3 (BU) with pin 5 (GY) for 2...7 s.
➤ ➥
The switching points have been successfully taught in if the green LED flashes for 1.5 s at a
frequency of 5 Hz.
Window function — switching between hysteresis and window
➤ ➤
Position the object at any point in the sensing range.
➤ ➤
Bridge pin 3 (BU) with pin 5 (GY) for 8...13 s.
➤ ➤
Bridge pin 3 (BU) with pin 5 (GY) for 8...13 s.
➤ ➥
The window has been taught in successfully if the green LED flashes for 1.5 s at a frequency of
5 Hz.
➤ ➥
The hysteresis has been taught in successfully if the yellow LED flashes for 1.5 s at a frequency
of 5 Hz.
Inverting the output function (NO/NC)
➤ ➤
Select the switching output.
➤ ➤
Bridge pin 3 (BU) with pin 5 (GY) for 14...19 s.
➤ ➥
The output function has been successfully inverted as an NO contact if the green LED flashes
for 1.5 s at a frequency of 5 Hz.
➤ ➥
The output function has been successfully inverted as an NC contact if the green LED flashes
for 1.5 s at a frequency of 5 Hz.
Set operation as a retro-reflective sensor
➤ ➤
Position the reflector in the sensing range.
➤ ➤
Bridge pin 1 (BU) with pin 5 (GY) for at least 21 s.
➤ ➥
The operation in retro-reflective mode has been taught in successfully if the green LED
flashes for 1.5 s at a frequency of 5 Hz.