turck PSU67-3P-1S-2L-24250-IOL-F, Инструкция по эксплуатации

Страница: 31 / 43

Operating
IO-Link error codes
Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com
V01.00 | 2022/09 | 31
Event code Event Event-type Description
0x1850 eFuse output current
pre-alarm ch1 Notification The output current of the eFuse at the channel has
exceeded the pre-alarm level for more than 2 s.
0x1851 eFuse output current
pre-alarm ch2 Notification
0x1852 eFuse output current
pre-alarm ch3 Notification
0x1853 eFuse output current
pre-alarm ch4 Notification
0x4210 Permissible device
temperature exceeded Warning The temperature in the device is too high.
0x6320 Parameter error Error The parameter settings of the device are invalid.
9.5 IO-Link error codes
Error code Description
0x8000 No details Application error in device
Service was denied by device, no detailed information avail-
able
0x8011 Index not available
0x8012 Sub index not available
0x8020 Service temporarily not available No access to parameters possible, device does not allow ac-
cess in current state
0x8021 Service temporarily not available,
local control No access to parameters possible, device in local operating
mode, operation only via operator interface on device
0x2022 Service temporarily not available,
device control No access to parameters possible, device in remote operat-
ing mode, operation only via IO-Link
0x8023 Access denied Access denied, index not writable
0x8030 Parameter value out of range
0x8031 Parameter value above limit
0x8032 Parameter value below limit
0x8033 Parameter length overrun Length of data to be written does not match the length
defined for this parameter.
0x8034 Parameter length underrun
0x8035 Function not available Command not supported by the device
0x8036 Function temporarily unavailable Command not supported by the device
0x8040 Interfering parameter Invalid parameter set, a written single parameter value does
not fit to other parameter settings
0x8041 Inconsistent parameter set Parameters inconsistent, device plausibility check failed
0x8082 Application not ready Device not ready, access denied