Installing
Mounting the device in a hydraulic cylinder
16
Hans Turck GmbH & Co. KG | T +49 208 4952-0 | F +49 208 4952-264 | [email protected] | www.turck.com
5.1
Mounting the device in a hydraulic cylinder
NOTICE
Incorrect mounting
Risk of damage to the hydraulic cylinder
Observe the instructions of the cylinder manufacturer and the hydraulic cylinder
specifications.
The devices can be mounted directly in a hydraulic cylinder. For this a hole with a recommen-
ded diameter of 13.5 mm must be provided in the cylinder piston rod (depending on the
cylinder design). To fasten the device, an M18 × 1.5 threaded hole according to ISO 6149-1 is
required in the end cap of the hydraulic cylinder.
Содержание LTX-EF10 Series
Страница 1: ...Your Global Automation Partner Instructions for Use LTX Linear Position Sensors with Analog Output ...
Страница 2: ...2 Hans Turck GmbH Co KG T 49 208 4952 0 F 49 208 4952 264 more turck com www turck com ...
Страница 30: ...Over 30 subsidiaries and over 60 representations worldwide www turck com D102240 2022 04 D102240 ...