Page 11 of 20
Turbovex A/S
Industrivej 45, DK – 9600 Aars
Telefon: +45 96 98 14 62 – Fax: +45 98 96 42 24
e-mail:
–
www.turbovex.dk
4.6.0 Installing bottom extension
Dismantle the bottom filter and the 4 angle brackets
for the wires. The screws must remain in the unit so
the unit won´t be leaky.
First mount the inner tube and then the outer tube on
the unit.
The intake ring is mounted on the extension tubes.
The filter and the angle brackets are reattached. The
brackets are fastened using the supplied screws in
the extension tubes.
Wire and wire tensioners are fitted. Tension is applied
to the wires between the supplied bracket mounted on
purlins and battens. The purpose of the wires is to
adjust and keep the unit steady in a vertical position.
4 pcs.
