Turbosol Beton Master, Руководство по эксплуатации и обслуживанию

Страница: 17 / 58

TRANSPORTATION AND HANDLING
4
561270 - IS19/07 - EN
17/58
4.2 LIFTING
BETON MASTER is provided with four lifting points and supplied with a lifting beam (FIG. 10).
- Fasten the ropes to the lifting beam (FIG. 10-REF. 1) and to the four lifting points, attaching the shorter ropes to the hooks
shown in FIG. 10-REF. 2 and the longer ropes to the hooks shown in FIG. 10-REF. 3.
Use the lifting beam only for the lifting of Beton Master.
Don't use the lifting beam to lift any other load. Before using the lifting beam, check its integrity and in case replace
it.
1
2
3
FIG. 10
Lifting should be carried out in strict observance of all the relevant safety rules, and the equipment used
must be in good order and conforming to regulations. The lifting apparatus must be operated by
specifically trained and authorized personnel.
Use only hooks and ropes certified for lifting 2000 kg.
Make sure the area is clear of any bystanders before lifting the machine.
Do not stand under suspended loads. To prevent damages to the machine, do not lift or lower it with abrupt
movements. Do not change the lifting hook's anchoring point. Move the machine only over level surfaces; avoid
sloping surfaces to prevent the risk of being hit by the machine or crushed between the machine and fixed obstacles.