Turbosol Beton Master, Руководство по эксплуатации и обслуживанию

Страница: 13 / 58

TECHNICAL DESCRIPTION
3
561270 - IS19/07 - EN
13/58
3.4 INTENDED USES
The machine has been designed and built for the following use:
FIELD OF USE: CONSTRUCTION WORK.
INTENDED USE: PUMPING SHOTCRETE AND CONCRETE
3.5 MATERIALS USED
- Concrete with maximum particle size 25 mm if aggregates obtained by crushing; maximum particle size 30 mm in case of
spheroidal aggregates.
- Shotcrete.
3.6 NAME OF MACHINE PARTS
1
2
3
4
5
6
7
8
9
10
11
12
FIG. 04 *Figure shows towing gear.
13
14
15
16
18
23
19
21
20
22
17
FIG. 05
LEGEND
FIG. 04-REF. 1 - Casing FIG. 05-REF. 18 - Hydraulic pumping cylinder
FIG. 04-REF. 2 - Upper hopper FIG. 05-REF. 19 - Solenoid valves
FIG. 04-REF. 3 - Grid FIG. 05-REF. 20 - Switching jack control sensor
FIG. 04-REF. 4 - Vibrator FIG. 05-REF. 21 - Switching jack control sensor
FIG. 04-REF. 5 - Control column FIG. 05-REF. 22 - Pumping control sensor
FIG. 04-REF. 6 - Control panel FIG. 05-REF. 23 - Pumping control sensor
FIG. 04-REF. 7 - Towing gear*
FIG. 04-REF. 8 - Exchanger
FIG. 04-REF. 9 - Engine
FIG. 04-REF. 10 - Hydraulic pump assembly
FIG. 04-REF. 11 - Mixer
FIG. 04-REF. 12 - Lower hopper
FIG. 05-REF. 13 - Delivery flange
FIG. 05-REF. 14 - S-valve
FIG. 05-REF. 15 - S-valve switching jack
FIG. 05-REF. 16 - Pumping tube
FIG. 05-REF. 17 - Water tank