TurboLock TL88 22
Section 9
Maintenance
Proper cleaning and maintenance of your lock ensures it will continue to work as it should.
• For most cleaning purposes, use clean (or purified) water and a soft, non-abrasive cloth.
• If a mess cannot be cleaned with water, apply a gentle cleaner to the cloth and clean.
• Do not apply cleaner or detergent directly to any part of the lock.
• After cleaning with a cleaner or detergent, wipe off any residue using a second non-abrasive cloth. Be sure to dampen the
cloth with clean (purified) water.
• The TL88 meets IP65 water-resistance. It can withstand splashes and contact with water once properly installed; however, do
not submerge the lock.
• Do not let water and liquids get into the lock’s electric parts or battery compartment. This will void the warranty.
Section 10
Troubleshooting
Problem
Possible Cause
Solution(s)
Why can’t I open the door?
Too much time has passed since engaging
with the lock.
The TL88 automatically locks after ~3 seconds of inactivity.
Your access has been restricted.
If you received a key from the lock’s admin, your access
may be restricted to certain times of the day. Check with
your admin regarding these details.
Why does the lock jam? / The
door doesn’t close.
The latch size is wrong.
Disassemble the lock and check the latch assembly. If
retrofitting, compare the latch length and adjust as needed.
If installed on a new door, adjust the latch and or, drill into
the door to fit the latch as needed.
The strike plate and latch aren’t correctly
aligned.
Open the door and check the alignment of both the latch
and the strike plate. Adjust as needed.
