18
TURBOLOCK TL114
Section 5
Using the Lock
To unlock the TL114, use the keypad to enter the passcode, then press ‘#’. The TL114 will unlock after the voice confirmation
(“Opened”) and will automatically lock again after a few seconds.
The Admin Passcode must be changed from the default. See Section 6.
Section 6
Keypad Passcodes
6.1 Changing the Admin Passcode
• The Admin Passcode must always be exactly 6 digits long.
• The default Admin Passcode is ‘123456’.
For security, it is highly recommended that you change the Admin Passcode from the manufacturer default.
Step 1.
Press the ‘#’ on the keypad, and enter the current Admin Passcode then press ‘#’. Voice navigation will guide you
through the process:
“To set up an Admin Passcode, please press 1.”
Step 2.
Enter ‘1’ then press ‘#’.
Step 3.
Enter the new Admin Passcode then press ‘#’. After the voice confirmation (“Success”), the new Admin Passcode is
saved.
Step 4.
Test the new Admin Passcode to confirm the modification was successful.
• The passcode must be entered while the keypad backlight is on. If it goes out, begin again at Step 1.
• If the Admin Passcode is lost or forgotten, the lock may be reset. Refer to Section 8.
