TURBOLOCK TL114 11
Step 7.
Install the 9V alkaline battery (Fig. 12) and cover the battery compartment to complete the installation. (Fig. 13)
Make sure the positive and negative electrode of the battery are installed properly.
Do not close the door until the installation is completed and the lock is fully tested. It’s highly recommended to first
use the default passcode to test the lock. After fully testing the lock, be sure to change the default admin passcode.
If the lock doesn’t work properly, please disassemble and follow above instructions to install again.
Compartment
Cover
Fig. 9
Fig. 10
BATTERY
Mounting Screws
Thumb
Vertical
Thumb
Horizontal
Fig. 11
Fig. 12
Fig. 13
Fig. 8
