![Turbo Eco-Net 128 Скачать руководство пользователя страница 7](http://html1.mh-extra.com/html/turbo/eco-net-128/eco-net-128_use-and-maintenance-instructions_1180804007.webp)
U s e r I n s t r u c t i o n s
Eco-Net 128 Control Unit
InMn 26 UCESTD
it Rev.1.02
TURBO s.r.l.
Dust Filter Components
Via Po 33/35 20811 Cesano Maderno (MB) Italy Tel ++39 0362 574024 Fax ++39 0362 574092
7
▪
The cable glands are selected in relation to the diameter of the cable use.
▪
Sealing of the cable gland is guaranteed by the compression of the rubber gasket, which tightens
on the external diameter of the cable.
▪
The dimensions of the cable and the cable gland must guarantee that pull on the power supply
cable does not affect the terminals.
▪
The terminal board must not be a mechanical anchorage point of the wires.
▪
The PG9 cable gland supplied on request, has a minimum cable diameter of 4mm and maximum of
8mm, with locking nut of 19mm.
▪
Any use not foreseen in this user manual and improper use of the device may cause damage to the
same and possibly to the connected equipment.
▪
Misuse or tampering with equipment could cause damage to people.
▪
The container is waterproof when the door is closed.
▪
If rigid or flexible ducts are used for wiring, make sure they cannot be filled with water or other
liquids.
▪
Do not make holes on the container that are unprotected or protected by accessories with a
degree of protection lower than that of the control unit.
▪
If water is found in the container, immediately stop supplying voltage.
▪
Whenever the control unit is used in ways not specified by the manufacturer, the protection
envisioned by the appliance may be compromised.
▪
The control unit does not release potentially toxic or hazardous substances for health and the
environment.
▪
No part with dangerous voltage is normally accessible.
IMPORTANT
Do not use the control unit before reading
and understanding this manual.