U s e A n d M a i n t e n a n c e I n s t r u c t i o n s
E c o n o m i z e r E 8 T 1 6 O u t p u t C h a n n e l s
I n M n E E 8 T
e n R e v . 0 0
T U R B O S r l
D u s t F i l t e r C o m p o n e n t s
V i a P o 3 3 / 3 5 2 0 8 1 1 C e s a n o M a d e r n o ( M B ) I t a l y T e l + + 3 9 0 3 6 2 5 7 4 0 2 4 F a x + + 3 9 0 3 6 2 5 7 4 0 9 2
2 3
Default Settings
The default settings are:
S e t t i n g
V a l u e
Operating Mode
Automatic
Start Of Cleaning Dp
0.80 kPa
End Of Cleaning Dp
0.40 kPa
Pulse Time Valves
200 m.sec.
Pause Time Cycle Valves
20 sec.
Post-Cleaning Activation
0.10 kpa
Number Of Valves
1
Cleaning When Fan Is Off
2
Pulse Time V. Cleaning Fan Off
200 m.sec.
Pause Time V. Cleaning Fan Off
20 sec.
Start Precoating dP
1.50 kpa
Language
Italian
Maintenance
The control unit has no parts that can be replaced, except for the fuse.
All repair operations must be carried out by the manufacturer.
To clean dust and dirt from the surfaces, gently rub with cotton or other
soft cloth soaked with non-aggressive, non-abrasive detergents, use
those used for glass surfaces; do not use solvents or aromatic compounds and
do not rub with abrasive sponges.
Scrapping
Dispose of properly after use. Dispose of the product according to laws
in force for electronic equipment.
This device is for use in a dust collection system and is therefore part of
a fixed installation. Warranty
