U s e A n d M a i n t e n a n c e I n s t r u c t i o n s
E c o n o m i z e r E 8 T 1 6 O u t p u t C h a n n e l s
I n M n E E 8 T
e n R e v . 0 0
T U R B O S r l
D u s t F i l t e r C o m p o n e n t s
V i a P o 3 3 / 3 5 2 0 8 1 1 C e s a n o M a d e r n o ( M B ) I t a l y T e l + + 3 9 0 3 6 2 5 7 4 0 2 4 F a x + + 3 9 0 3 6 2 5 7 4 0 9 2
1 1
Keyboard And Monitor
There are 5 round keys on the front panel to control the instrument and select
functions.
When turned on, the screen displays the firmware version
during initialisation
The next screen is always displayed during normal
operations:
Menu
provides access to settings
it is used as RESET in the event of alarms
Keys
Increase and decrease the values, manually start
valves in Test mode, used to scroll any alarms.
The
S
key starts/stops solenoid valves in
manual/special manual mode. It is not enabled in
automatic/proportional mode.
Use the L key to select one of the 5 available
languages: Italian, English, French, German,
Spanish.
On the main screen, when an alarm is active, the letter
L
changes state becomes
A
,
pressing
scrolls through the alarms, pressing
A
returns to the screen with
dP reading.
With the probe installed, the
and-keys change the screen to display the
emission reading values with that of the DP values.
Without the probe installed, only the screen with dP values is available.
