16.
Check damaged parts:
Check product to see if any parts are damaged. Damaged parts should be properly
repaired or replaced by an authorized service center unless otherwise indicated
else where in this instruction manual.
17.
Always have your product repaired by an expert:
This product is manufactured in accordance with the relevant safety rules.
Repairing of electric appliances may be carried out only by experts; otherwise it
may cause considerable danger.
OPERATION OF WEED EATER:
SAFETY NOTE: Please ensure the machine is held with both hands and is at a safe
distance from the body before operation.
Setting The Cutting Line
NOTE: Be sure to remove the battery from the machine before you adjust the cutting
line.
LINE FEEDING PROCEDURE
In order to feed a length of cutting line, strike the bump cap on the lawn while the machine is
running. This will automatically feed a new length of line and trim it to the correct length. A firm
but gentle motion should be used to strike the bump cap. The unit should be angled slightly
forward to prevent the guard from contacting the ground. This process may be repeated as often
as necessary. If unit fails to feed, unplug extension cord at machine and clean out the bump cap.
See Fig. 9.
OPERATING THE WEED EATER
NOTE: This machine is designed only to cut grass and weeds.
1. Remove the blade protector.
See Fig. 9.
2. Insert the Battery Pack P into the machine. See Fig. 10.
3. Check the height of the machine is suitable for you. Adjust using the Adjustment Knob H if
necessary. See Fig. 11.
4. To switch on your machine press the Safety Button E and then press the On/Off Trigger C.
See Fig. 12.
