Turbo Ace matrix Скачать руководство пользователя страница 25

Страница: 25 / 74

Turbo Ace MATRIX

the intelligent orientation control to the Flight Mode Switch on the transmitter,

by pressing ENT on the Devention10



Model Menu



Device Output



Flap

(AUX 1) and selecting FMOD SW by pressing L or R (Make sure Type Select

is Airplane mode, pressing ENT on the Devention10



model menu



type

select



airplane) and making sure that Function shows as ACTIVE.

(1)

The NAZA Assistant screen should show INTELLIGENT ORIENTATION

CONTROL with Home Lock | Course Lock | Off. You need a 3 position

switch for the Intelligent Orientation Control Switch. For example: When

using Devention 10 and RX 1002, the Intelligent Orientation Control Switch is

assigned  to  the  Flight  Mode  Switch  on  the  transmitter.  This  is  done  by
connecting  the  Receiver’s  Flap  (AUX  1)  channel  to  the  Flight  Controller’s
“X2”  channel.  Then  press  ENT  on  the  Devo  10



Model Menu



Device

Output



Flap (AUX 1) and select FMOD SW by pressing L or R and making

sure the Function shows as ACTIVE.

(2)

Now you need to make sure when the FMOD SW is flipped forward (toward

the ground) the switch will change the Intelligent Orientation Control to “Off”.

If the slider is closer to “Course Lock” or “Home Lock”, then the Intelligent

Orientation Control Switch slider is in the wrong position. To bring the slider
closer to “Off”, press ENT button on your transmitter



Function



Reverse Switch



Flap (AUX 1) and reverse your Flap (AUX 1)

SWITCH setting (which is now set to your FMOD SW setting) by pressing L

or R. This change will bring the Intelligent Orientation Control Switch slider

closer to “Off”.

(3)

Move your FMOD SWITCH to the middle position to set the midpoints for
the middle position first. If the “Course Lock” segment turns blue, please skip

to Step #5.

(4)

If the “Course Lock” segment does not turn blue, press ENT on your

transmitter



Function Menu



Sub Trim



Flap (AUX 1) and adjust your

Flap’s (AUX 1) midpoint by pressing the L or R button until “Course Lock”

segment turns blue.

(5)

Flip the FMOD SWITCH forward (toward the ground). If the “Off” segment

turns blue then skip to Step #7.

(6)

If the “Off” segment does not turn blue, press ENT on your

transmitter



Function Menu



Travel Adjust



Flap (AUX 1). Use the UP/DN

button to 100.0% and adjust your Flap (AUX 1)’s endpoint by pressing
the L or R button until “Off” segment turns blue.

Содержание matrix











































































Результаты поиска

Содержание matrix

Отзывы:

Бренды по названию

Популярные бренды

Turbo Ace matrix, Руководство пользователя

Результаты поиска

Содержание matrix

Отзывы:

Бренды по названию

Популярные бренды