manualshive.com logo in svg

TuffStuff TDH-345, Руководство пользователя

Поделиться
Скачать
TuffStuff TDH-345 Скачать руководство пользователя страница 7

Fig. 14

Mount the 

Chrome Post Receptacle (#43)

 onto the 

Bottom As

sembly Holder (#28)

, in the position as shown above, and secure it int

place using two Hex Head Cap Screws 3/8-16 x 4 (#32), four Flat Washer
SAE 3/8” (#45), and two Nylon Insert Jam Lock Nuts 3/8-16 (#46).

Note:

  The two Pyramid Rubber Bumpers (#34) located on th

Chrome Post Receptacle (#43)

  have been assembled by the fac

tory.

y

ig. 15

Next, insert the 

Chrome Post (#31)

  into the

Chrome Post Re-

eptacle (#43)

, in the position as shown above, and secure it into place

sing one Hex Head Cap Screw 3/8-16 X 2 3/4 (#33), two Flat Washers

AE 3/8” (#45), and one Nylon Insert Jam Lock Nut 3/8-16 (#46).  Refer to 

he Exploded View Diagram on page 18 for further illustration on this assem-

y.

Fig. 16

Carefully slide the 

Weight Carriage (#37)

 onto the 

Chrome Pos

(#31)

, with the weight prongs toward the inside of the unit, as shown above.

Caution:

It is recommended to use another person in assisting with 

this assembly.

ig. 13

Affix the 

Top Stabilizer (#3)

 to the two

Triangular Corner Plates 

#2)

, in the position as shown above, and secure it into place using four Hex 

ead Cap Screws 1/2-13 X 4 1/4 (#12), eight Flat Washers SAE 1/2” (#10), 

nd four Nylon Insert Lock Nuts 1/2-13 (#9).

Loosely Fasten:

  Do not completely fasten this hardware assembly 

at this time, as it will be completely fastened later in the assembly 

process.

SELY FASTEN

TDH 345 Half Cage Ensemble

6

Содержание TDH-345





















Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды