manualshive.com logo in svg

TuffStuff TDH-345, Руководство пользователя

Поделиться
Скачать
TuffStuff TDH-345 Скачать руководство пользователя страница 11

ig. 29

Route the end of the

Lat Cable (#53)

  through the

Top Pulley

Housing (#1)

 tube.  Next, pull gently the 

Lat Cable (#53)

 down through the 

lot on the bottom side of the 

Top Pulley Housing (#1)

.

Caution:

 Do not pull the 

Lat Cable (#53)

 all the way through the 

Top

Pulley Housing (#1)

until you have installed the Nylon Pulley 4 1/2” 

Rd. (#20-Labeled B), as this will prevent any damage to the

Cable

.

See

Fig. 30.

Note:

Refer to the Cable Mapping Diagram on page 18 for further

detailed illustration of the 

Lat Cable (#53)

 routing.

Fig. 30

Insert one Nylon Pulley 4 1/2” Rd. (#20-Labeled B) into the slot o

the

Top Pulley Housing (#1)

, in the position as shown above, and secure 

into place using one Hex Head Cap Screw 3/8-16 X 2 1/2 (#29), two Fla
Washers SAE 3/8” (#45), and one Nylon Insert Jam Lock Nut 3/8-16 (#46)
Be sure the 

Lat Cable (#53)

 is routed properly into the pulley’s groove.

Note:

Refer to the Cable Mapping Diagram on page 18 for furthe

detailed illustration of the 

Lat Cable (#53)

 routing.

ig. 31

Secure the 

Top Pulley Housing (#1)

 to the 

Center Upright (#19)

sing one Hex Head Cap Screw 3/8-16 X 2 3/4 (#33), two Flat Washers

SAE 3/8” (#45), and one Nylon Insert Jam Lock Nut 3/8-16 (#46).

Caution:

 To prevent damage to the 

Lat Cable (#53)

, it is important to 

make sure that the 

Lat Cable (#53)

 is routed over the top, and not 

under the Hex Head Cap Screw 3/8-16 X 2 3/4 (#33).

Fig. 32

Assemble the two

Double Pulley Plates (#21)

  using two Nylo

Pulleys 4 1/2” Rd. (#20-Labeled C and F), two Hex Head Cap Screws 3/8
16 X 1 3/4 (#30), four Flat Washers SAE 3/8” (#45), and two Nylon Inser
Jam Lock Nuts 3/8-16 (#46).

Note:

 The four holes on the 

Double Pulley Plates (#21

) are used t

adjust the cable tension once the cable routing has been completed.

TDH 345 Half Cage Ensemble

10

y

Содержание TDH-345





















Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды