manualshive.com logo in svg

TuffStuff TDH-345, Руководство пользователя

Поделиться
Скачать
TuffStuff TDH-345 Скачать руководство пользователя страница 5

ig. 5

Insert the two

Selectorized Uprights (#6)

  onto the receptacles 

cated on the 

Base Frame (#11)

, in the position as shown above with the 

ole pattern facing away from the unit.

Note:

  The two Plastic Insert Caps 2 X 3 (#35) located on top of the 

Selectorized Uprights (#6)

 have been assembled by the factory.

Fig. 6

Using a rubber mallet, insert one Plastic End Cap w/Groove 2 X 

(#8) onto the tube-end of the 

Accessory Rack (#7).

Note:

  The two Plastic Tube Guides 2” Sq. (#60) located on the 

Ac

cessory Rack (#7)

 have been assembled by the factory.

y

ig. 7

Attach the 

Accessory Rack (#7)

 and a 

Triangular Corner Plate 

#2)

  to the

Base Frame (#11)

, in the position as shown above, using two

ex Head Cap Screws 1/2-13 X 4 1/2 (#14), four Flat Washers SAE

/2” (#10), and two Nylon Insert Lock Nuts 1/2-13 (#9).  Next, affix the Tria

n-

ular Corner Plate (#2)

 to the 

Selectorized Upright (#6)

  using two Hex 

ead Cap Screws 1/2-13 X 3 (#13), four Flat Washers SAE 1/2” (#10), and 

wo Nylon Insert Lock Nuts 1/2-13 (#9).

Loosely Fasten:

 Do not completely fasten this hardware assembly 

at this time, as it will be completely fastened later in the assembly 

process.

Fig. 8

Attach a 

Triangular Corner Plate (#2)

 to the 

Selectorized Up

right (#6)

, in the position as shown above, using two Hex Head Cap Screw

1/2-13 X 3 (#13), four Flat Washers SAE 1/2” (#10), and two Nylon Inse
Lock Nuts 1/2-13 (#9).  Next, affix the 

Triangular Corner Plate (#2)

to th

Base Frame (#11)

, using two Hex Head Cap Screws 1/2-13 X 4 1/4 (#12

four Flat Washers SAE 1/2” (#10), and two Nylon Insert Lock Nuts 1/2-1
(#9).

Loosely Fasten:

 Do not completely fasten this hardware assemb

at this time, as it will be completely fastened later in the assembl

process.

SELY FASTEN

LOOSELY FASTEN

TDH 345 Half Cage Ensemble

4

Содержание TDH-345





















Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды