5
FIG. 16
Affix the
Top Cross Brace (#44)
to the
Main Frame (#30)
using two Hex Head Cap Screws 1/2-13 X 3 1/2 (#24), four Flat
Washers SAE 1/2” (#29), and two Nylon Insert Lock Nuts 1/2-13
(#22). Next, affix the
Top Cross Brace (#44)
to the
Weight Shroud
w/Plate (#3)
using two Hex Head Cap Screws 1/2-13 X 1 (#80), and
two Split Lock Washers B/O 1/2” (#83).
44
3
30
SP-415 Inner/Outer Thigh
FIG. 15
Attach the
Main Frame (#30)
to the
Bottom Cross Brace
(#37)
, in the position as shown above, using two Hex Head Cap
Screws 1/2-13 X 3 1/2 (#24), four Flat Washers SAE 1/2” (#29), and
two Nylon Insert Lock Nuts 1/2-13 (#22).
30
37
FIG. 13
Maneuver the two
Pivot Axles (#41)
into the holes on the
bottom side of the
Pivot Axle Support Tube (#35)
. Next, Loosely
Fasten the
Pivot Axle Support Tube (#35)
along with the two captive
Pivot Axles (#41)
to the
Main Frame (#30)
using two Hex Head Cap
Screws 3/8-16 X 3 1/4 (#78), four Flat Washers SAE 3/8” (#19), and
two Nylon Insert Lock Nuts 3/8-16 (#79).
FIG. 14
Attach the
Pivot Actuator Plate (#36)
to the
Right Leg
Arm (#31)
and the
Left Leg Arm (#32)
receptacles and secure it into
place using two Flat Washers SAE 3/8” (#19), and two Nylon Insert
Lock Nuts 3/8-16 (#79).
Next, fully fasten the
Pivot Axle Support Tube (#35)
to
the
Main Frame (#30)
. Then, thread the four Socket Set Screws 3/8-
16 X 1/2 (#67) located on the
Pivot Axle Support Tube (#35)
to align
the
Leg Arms (#31, #32)
.
31
32
35
32
31
36
67
35
67
30
30
