Owner’s Manual: Assembly Instructions
6
FIG. 20
Using a hammer, insert the Roll Pin 3/16 X 3/4 (#53) to
the cable retainer bracket of the
Adjustable Cam Plate (#33)
.
49
53
33
SP-415 Inner/Outer Thigh
FIG. 19
Attach the
Cable (#49)
to the cable retainer of the
Adjust-
able Cam Plate (#33)
.
Note:
Refer to
Fig B
on fold-out page 10 for further detailed il-
lustration of this assembly.
33
49
FIG. 18
Route the
Cable (#49)
around the Nylon Pulleys 3 1/2”
Rd. (#81-Labeled C, D) passing the cable between the Nylon Pulleys
and the
Cover Plates (#42)
. Next, secure these assemblies and po-
sition the two
Cover Plates (#42)
as shown above.
Note:
The black boxed letter pointing to the pulleys are used
throughout this manual as reference to the Cable Mapping Dia-
gram on fold-out page 10. These black boxed letters will be
primarily used for locating certain pulleys during the cable rout-
ing process beginning with
Fig. 18.
49
42
D
42
C
FIG. 17
Lift the
Top Plate/Selector Bar (#8)
about 8” over the
weight stack and use the
Selector Pin (#89)
to lock it into that posi-
tion. This will facilitate the assembly of the
Cable (#49)
to the
Ad-
justable Cam Plate (#33).
4
8
89
