FIG. 5
Attach the
Rear Upright (#4)
to the
Base Frame (#2)
and secure it using two Hex Head Cap Screws 3/8 -16 X 2 3/4
(#77), four Flat Washers SAE 3/8 (#90) and two Nylon Insert
Lock Nuts 3/8 -16 (#86).
Note
: Do not tighten this hardware
assembly at this time
. Next, insert two Plastic End Caps 2” Sq.
w/groove (#63) into the
Rear Upright (#4)
, as shown above.
FIG. 6
Attach the
Front Upright (#3)
to the
Base Frame
(#2)
and secure it using one Hex Head Cap Screw 3/8-16 X 2
3/4 (#77), two Flat Washers SAE 3/8 (#90) and one Nylon
Insert Jam Lock Nut 3/8-16 (#86).
Note
: Do not tighten this
hardware assembly at this time.
FIG. 7
Attach the
Leg Extension Seat Frame (#38)
to the
Base Frame (#2)
. Secure the
Leg Extension Seat Frame
(#38)
to the
Base Frame (#2)
using one Hex Head Cap Screw
3/8-16 X 4 1/2 (#93), two Flat Washers SAE 3/8 (#90) and one
Nylon Insert Jam Lock Nut 3/8-16 (#86). Next, secure the
Leg
Extension Seat Frame (#38)
to the
Front Upright (#3)
using
one Hex Head Cap Screw 3/8 -16 X 2 3/4 (#77), two Flat
Washers SAE (#90) and one Nylon Insert Jam Lock Nut 3/8 -16
(#86).
Note
: Do not tighten this hardware assembly at this
time.
FIG. 8
Slide the
Pec Dec Adj Seat Tube (#27)
onto the
Rear Upright (#4)
, as shown above.
Note
: Position the
Pe
Dec Adj Seat Tube (#27)
with the Push-Pull Pin 1/2 (#56)
facing the same side as the selector holes on the
Rear Uprigh
(#4)
.
MSL-IV Muscle IV Home Gym
3
Содержание MSL-IV
Страница 20: ...MSL IV Muscle IV Home Gym 19 ...