TUBESCA-COMABI 22403620, Инструкция по эксплуатации

Страница: 40 / 60

40
TOTEM 2

For soft ground (loose soil, gravel, etc.), ensure there is a profiled track.

TOTEM is moved with two people: the mobile access and working tower is “PUSHED” at a maximum height as specified
by the manufacturer; it is not “PULLED”.

When the mobile access and working tower is left unattended, ensure that the stabilisers are working correctly (see
section § 2-2-5), prevent all unauthorised access, and protect it from harsh weather conditions.
 Mobile towers are not designed to be covered in sheeting.

Mobile towers complying with EN 1004-1 are not designed to be used as a means of peripheral protection.

Mobile towers complying with EN 1004-1 are not designed to be used as a means of entering or exiting other
structures, such as a staircase, for example.
 It is forbidden to:
o
Use a lifting beam, even a manual one, on the outside of the mobile tower.
o
Stand on a platform without personal protection equipment being installed.
o
Cover the mobile access and working tower in sheeting, even partially.
o
Increase the height of the tower above the authorised height.
o
Use the castor wheel settings to increase the height of the mobile tower.
o
Use components other than the ones that have been supplied and described in the parts list.
o
Use damaged parts.
o
Use a mobile access and working tower which has not been assembled vertically (tolerance: 1%).
o
Use a mobile access and working tower which has not been assembled according to the instructions in this
manual.
o
Create a bridge between a mobile access and working tower and a building, or between two mobile towers.
o
Lean an access ladder against the mobile tower.
o
Jump on the platforms.
o
Use boards as a platform.
o
Access the working platform from outside the tower.
o
Move the mobile access and working tower on ground which is sloped more than 3%.
o
Move the mobile access and working tower with a motor vehicle.
o
Move the mobile access and working tower in wind speeds above 35 km/h.
o
Move the mobile access and working tower when personnel or equipment are on it.
o
Lift the mobile access and working tower with a crane or bridge crane.
o
Move a mobile tower which has a height above 6m.
o
Keep trap doors blocked open.
o
Use the guard rail to elevate the working height.
Esta ficha não substitui a regulamentação em vigor, a qual deverá ser consultada.

Respeitar as cargas permitidas sobre as pranchas e a estrutura.

As forças horizontais não devem ultrapassar os 30 kg.

Vento-limite com estabilizadores = 35 km/h.

Com ventos superiores a 35 km/h, ancorar a torre móvel de acesso e de trabalho.

Com ventos superiores a 45 km/h, desmontar a torre móvel segundo o ponto 7.

Retirar os rodapés quando a torre móvel de acesso e de trabalho estiver no exterior e não estiver a ser utilizada.

Não se aproximar de condutores descarnados sob tensão.
 Nas zonas acessíveis ao público, impedir que o mesmo possa aceder ao aparelho.
 Em caso de passagem de máquinas, veículos, etc., balizar a zona de implantação.

Confirmar que não existem obstáculos aéreos na zona de deslocação.

Ter sempre uma roda recolhida no máximo.

As torres móveis de acesso e de trabalho só devem ser deslocadas manualmente e sobre um piso sólido, nivelado e
sem obstáculos em terra ou no ar. Durante a deslocação, não se deve ultrapassar a velocidade normal de andamento
de uma pessoa.
A torre móvel de acesso e de trabalho a deslocar não deve exceder os 6 m de altura e não deve ter
ninguém em cima.

Manter os estabilizadores fixados na torre móvel de acesso e de trabalho durante a deslocação (folga entre o pé de
apoio e o solo reduzida ao mínimo).

O piso sobre o qual a torre móvel de acesso e de trabalho se desloca deve poder suportar as descidas de cargas.