Tube-Line NITRO 275RS, Руководство оператора

Страница: 30 / 49

Nitro -
Section 6 - Transportation / Storage 6-1
Section 6 - Transportation / Storage
Transport Safety
1. Comply with state and local laws governing safety and transporting of machinery on public roads.
2.
Do not exceed a safe travel speed. Slow down on rough terrain and while cornering.
3. Never allow riders on the machine.
WARNING: Normally, the load itself blocks manure and loose materials from being thrown towards the front.
As the load/pile gets reduced, the rotation of the rear beaters can throw some material forward, therefore it is
strongly recommended to lower the rear gate about 1/3 of the way down to prevent debris from being projected
towards the front.
Storage and Cleaning
Disconnect PTO drive shaft and hydraulic hoses before cleaning, adjusting, lubricating, or servicing this
machine.
1. The spreader must be thoroughly cleaned for extended storage. Manure is acidic and will damage paint
and cause rusting of metal components.
2. Allow the spreader to completely unload.
3. To clean the spreader, raise the rear gate.
4.
Keep tractor drawbar and Nitro hitch parallel. An uneven PTO may shear off a spline shaft.
Above diagram shows standard tractor dimensions matching the front PTO on the Nitro spreaders.
Storage Safety
1. Store the Nitro Manure Spreader in an area away from human activity.
2.
Do not allow children to play on or around the Nitro Manure Spreader.
3. Store the Nitro Manure Spreader in a dry, level area.
Travel Speed
A suggested starting speed is between 4-5 mph. This can be adjusted to operator preference. Maximum speed
under load can be found in
Section 3 - Tire Load Index Charts .