Tube-Line NITRO 275RS, Руководство оператора

Страница: 32 / 49

Nitro -
Section 7 - Service & Maintenance 7-1
Section 7 - Service & Maintenance
Apron Chain Tension Adjustment
1. Occasionally check the apron chain for any bent or damaged slats. It is important to straighten or replace
any damaged slats immediately.
2. The apron chain tension should be checked and adjusted on occasion. If apron chain has slack, tightening is
required:
• To tighten apron chain, loosen the four bolts on bearing and turn nut until proper tightness is achieved (both
sides) then tighten 4 bolts on the bearing.
When adjusting the apron chain tension use the following procedure.
1. Start on one side and tighten the nut a few turns.
2. Repeat on opposite side of machine to evenly tighten chain tension.
3. Repeat this procedure 2-3 times until moderate chain tension is achieved.
Correct Apron Chain Adjustment
Apron Chain Tension Adjustment
CAUTION: It is important to ensure nuts on 4 bolts on bearing are tightened after adjusting apron chain. In the
event of the nuts not being tightened, and the apron chain is reversed, equipment damage may occur.
Wheel Torque Specifications
NITRO MANURE SPREADER TORQUE SPECS
HUB SIZE BOLT PATTERN WHEEL STUD PN TUBELINE WHEEL STUD PN TORQUE REQ. (LB-FT)
12,000lb 8 x 5/8-18 PIB F58-225 31531 240 dry/ 180 lubed
16,000lb 10 x 3/4-16 PIB F750-35WS 31529 280-300 dry/ 220 lubed
20,000lb 10 x 3/4-16 PIB F750-35WS 31529 280-300 dry/ 220 lubed