9
For certain larger pools, it may be necessary to
connect two parallel units. Keep the evaporator
from one unit away from the evaporator in the
other, fans away from fans and evaporators away
from fans.
1, 2 and 3: optional valves
4: filter
5: water pump
CONNECTION TO ELECTRICAL POWER
To ensure your safety and the proper functioning of the device, the electrical connections must be
performed by a qualified electrician according to national codes, provincial and local regulations.
A circuit breaker must be installed close to the heat pump, in an accessible location.
Never open the electrical box without shutting off the power to all sources used for the operation of the
heat pump. If your heat pump has a pool pump control option, remember to close the circuit breaker to
this pump.
The spec sheet for the heat pump contains all the requirements for voltage and amps.
If the power cord is damaged, it must be replaced by a qualified electrician.
WARNING
When you shut off the water to one of the heat pumps, the water flow that previously
went through the heat pump is redistributed to the other heat pumps. Valves must be
adjusted to obtain the prescribed water pressures (see page 7).