Tsuruga 471A, Быстрое руководство, Страница: 9 / 48

7
Mounting Method
Mounting pitch
Panel cutout dimensions: 92
0
＋ 0 ． 8 × 45
0
＋ 0 ． 6 mm
Panel thickness: 0.6 ～ 3.5mm(Degree of protection IP65)
3.6 ～ 10mm(Degree of protection IP20)
If the material of the panel is aluminum, it may
be deformed due to its weak strength. So, it is
recommended to use the thickness of aluminum panel sheet at least 1.5mm.
Mounting Method to Panel
1
Insert the main unit fitted with the waterproof packings into the hole, from the panel
front, and insert the attached bracket to the ditch on both sides of the main unit.
Push the bracket as shown by arrow
① until the main unit is stably stays and fix the
bracket. The packings functions as stopper too, so do not remove it. Refer to the
side view of the bracket mounting.
2
To fix the main unit more firm, press the back part (center part) of the bracket
indicated by arrow
② by screwdriver, which enhances the stopper strength.
!
Caution

When pushing by screwdriver, apply it to the arrow ②
The pushing of other part may cause the damage of bracket.
More than 30
Mo
re
t
ha
n
75
More than 130
E
C
B
A
D
①
②
①
Push
②
Top view of bracket mounting
Side view of bracket mounting
Bracket
Panel to mount
Waterproof packings