Tsuruga 471A, Быстрое руководство, Страница: 19 / 48

17
Measurement
Operation
Mode Setting
(Set Code No.)
● RS-232C, RS-485 output function
Code
No.
Function Display 1 Setting range
Default
Value
80 Baud rate BAUD. 4800,9600,19200bps 9600bps
81 Parity PARIT non(none),odd(odd no.),even(even no.) non(none ）
82 BCC switching
BCC
ON,OFF OFF
83 Device number
RS.NO.
0 ～ 99 00
Setting method of code No.
This is the basic input method of function code.
Following the setting of the Code No., perform the function setting on the following pages.
Identification of the key color during
set up is as follows.
Black key: Valid key
White key: Invalid key
［ Common matters during the Setting mode ］
During setting mode, if the key is not
operated for about 5 minutes, the
operation returns into measurement
mode automatically. At this time, the
setting contents are not saved.
Again, if the reset key is pressed more
than 1 second, setting value which
was under changing process before
becomes invalid and returns to
measurement operation undergoing
mode.
MODE
▲
SET
SET
SET
MODE
Press 1 sec.
Confirm
Select the Code №
, ▲
To function setting