TSI Quest EDGE EG-4P, Руководство пользователя

Страница: 55 / 88

Running and Operating your Dosimeter 4-9
Locking or Securing your Dosimeter During Run
As explained previously under DMS set-up parameters, the security or
lock feature is designed to lock the meter during run to ensure the study
will not be stopped unless the lock feature is disabled. (Setting this
feature is programmed via DMS. See
“
Security Setting
” for more details.)
Locking or Securing

How to Lock or Secure
1.
Turn the dosimeter on and press the run/stop button to begin
logging your study.
2.
To enable the lock, press run/stop button three consecutive
times within one second intervals.

The Lock screen will appear.
Key indicator
Indicates dosimeter is
locked while running.
Padlock icon
Secure all
Figure 4-10
Locking/Securing run
N O T E
If lock/secure run does not activate, check that locking is set-up on your
dosimeter.
Unlocking

How to Unlock
1. To unlock, press run/stop button three consecutive times,
within one second intervals, and then press the on/off enter
button.
a. If the padlock icon and the key indicator were on the screen, these
will vanish and the measurement view will appear along with the
run indicator.
b. If you enabled the lock feature (with the key indicator showing and
the measurement view showing), then the key indicator will
disappear.
2. To stop your study, press the on/off enter button and the 3, 2, 1
will display as it ends the study.
a. To download and view your results in DMS, see Chapter 5 .