TSI Quest EDGE EG-4P, Руководство пользователя

Страница: 42 / 88

3-12 The Edge Personal Noise Dosimeter Model EG-4P User Manual
N O T E
“
OFF
” indicates that no item/parameter is selected.
4. To set the display features (see 5 ), save and send to the Edge (for
more details see
“
Saving and Sending/Setting Configurations
” saving
and sending configurations
”.)
Figure 3-9
Edge Display Screen
Security Setting
The security setting
is a type of “locking” feature (or secure run feature)
that enables you to password protect the instrument to prevent users
from inadvertently terminating a study. Initially, this feature is set through
the software and turned on once in run mode by pressing
run/stop key
three consecutive times. (To unlock, press run/stop key three
consecutive times and then press power key.) To set this feature, follow
the steps below.
1. Click on the Security
tab from the Edge’s Instrument Configuration
panel (see 1 ). To enable, click on the Enabled check box. (Ensure
the specific Edge is selected and communicating to the software.
See
“
Communicating & Downloading Data
” for more information.)
2. Next, select either Not Displayed (see 2 ) or Displayed (see 3 ) for
the measurement visibility.
N O T E
If measurement visibility is set to “not displayed” then a padlock icon
appears on the Edge display. If displayed is selected, the
measurements appear with a small padlock in the header section of the
display indicating the instrument cannot be stopped during a run while
in secure run mode.
3. Click the button to set the security setting (for more
details, see
“
Saving and Sending/Setting Configurations
”)
.