TSI Quest EDGE EG-4P, Руководство пользователя

Страница: 26 / 88

2-6 The Edge Personal Noise Dosimeter Model EG-4P User Manual
Docking Station Components
The table below explains the EdgeDock1 or EdgeDock5 LED indicators,
power connector, USB connector, and contact pins.
Table 2-2
EdgeDock1 and EdgeDock5 components
Docking station
components
Explanation
Charging indicator
Identifies if the dosimeter is “charging” or “fully
charged”. A
red blinking LED indicates the
dosimeter is charging. A solid green LED
equates to a fully charged dosimeter. (Note the
charging indicator is the first, or top, LED
indicator.)
Power indicator An amber LED indicates the docking station is
powered on.
Power connector Attach the power connector cable to the docking
station in order to charge the dosimeter(s).
USB connector Attach the USB connector to communicate with
the dosimeter(s).
Charge Contacts Placing the dosimeter (s) onto the charge
contacts allows charging and communication.
EdgeDock1 or EdgeDock5
The EdgeDock1 and EdgeDock5 are powered by a 12-volt charger
adapter.
Figure 2-6 illustrates the assembly of the charger adapter and the plug
adapter. It slides into place by guiding it down the back cavity (opening)
of the power supply.
N O T E
The example is a typical adapter which may be different than the one
you are using. Mechanically, it will function similarly.
A . Charger adapter B . Slide plug adapter into the
crevices of base
Figure 2-6
Attaching the Charger Adapter with the Plug Adapter