TSI Quest EDGE EG-4P, Руководство пользователя

Страница: 45 / 88

Setting up the Edge via Detection Management Software 3-15
Figure 3-12
Edge Firmware Update Screen
Saving and Sending/Setting Configurations
With the Edge, there are saved setup profiles used to quickly access and
apply to The Edge(s). Below explains how to save configuration settings
in DMS and how to send/set to the instrument.
N O T E
If you want to only send the setup, skip to step 3. Refer to this section
as you setup your instrument.
1. To save the Edge configuration in the software, click on a name in
the Configuration Profile Management panel (See 1 ).
N O T E
The name will be shaded a light gray when selected.

To create a new profile name, click and type in a profile
name. Click Save . (It will save under the configuration profile
management panel).
2. Click on the button (see 2 ) and type in a Name . Click Ok .
N O T E
This saves the configuration file in the software.

Or click button and rename the setting by typing in a
name. Click Ok .
3. To send to the instrument, select the (see 3 ).