TSI Instruments dusttrak II 8530, Руководство по эксплуатации и обслуживанию

Страница: 22 / 79

Chapter 2 12
Installing the Batteries in Model 8532 Handheld
Remove the battery cover by loosening captured screw on the bottom of the
unit. Orient battery with brass connectors facing forward. Insert battery into
cavity and slide forward to engage into pins. Replace the battery cover and
secure by tightening screw (see Figure 2-2).
Figure 2-2: Batteries into Handheld Unit
Connecting the External Pump to DustTrak Model 8530EP
The Model 8530EP is a Desktop DustTrak monitor with an external pump.
This DustTrak has no internal pump and will not work with any other external
pump other than the one provided by TSI (P/N 801675). The Model 8530EP
is intended for applications where the DustTrak is operated continuously over
extended periods (several days to months) under wide temperature
fluctuations (0 to 50°C). The external pump is designed to be more robust for
24/7 operation of the DustTrak monitor and is warranted to operate
continuously for one full year or 8760 hours. The Model 8530EP is ideal for
fugitive dust monitoring.
The pump and the DustTrak monitor come separately and require assembly.
Follow the steps below to connect the pump with the Model 8530EP
DustTrak monitor.
W A R N I N G
Turn the DustTrak monitor OFF before connecting the
external pump. Turn the DustTrak monitor ON only after
connecting the External Module.