TSC CPX4P Series, Руководство по обслуживанию

Страница: 195 / 232

191

Information
No. Item Description
[1] History Error codes and description of errors are displayed.
[2] Save the history in a file Save the error log recorded in Printer.
[3] User setting Set various user mode.
[4]
Prevent
Paper
Rubbing
Mode
Printhead
Position
Adjustment
• Select Printhead adjustment.
• Selecting this moves Printhead about 0.2 mm upward.
Fan Duty
Adjustment • Select paper suction fan adjustment.
• Selecting this increases paper suction force.
No. Item Description
[5]
Special
settings
Temporary
Clearing of
Maintenance
Cartridge Full
Error
• Enable this setting to temporarily disable the detection of full
Maintenance Cartridge based on the dot count.
Cutter JAM
Reprint
Mode
• When Auto-cutter is used and paper jam occurs just before the
end of a print operation, its print job may be recognized as it
has been completed without fault. If so, the print job is cleared
and a recovery print cannot be reproduced any longer.
By turning this mode ON, the last page is forcibly reprinted for
recovery, if the above paper jam occurs.
• When turning this mode ON, the extra print data of the last
page is held in the printer and it will take more time to receive
the next print job. This may cause that a throughput in the
consecutive print job increases.
• Explain the above disadvantage to the customer when
activating this mode.
Prevent Back
Feed Jam
Mode
• When a distance between two perforations is in the specific
range and diameter of roll paper is relatively large, a
perforation part of roll paper may be crushed and caught in
the roll holder housing due to inertia of the roll paper. This
may cause a paper jam in back-feeding at print start.
• By turning this mode ON, paper is fed forward once to
eliminate looseness then fed backward at print start reducing
the back feed jam.
• When turning this mode ON, forward and back feeding are
always performed at every print start after cutting, resulting in
increasing of throughput in the consecutive print job.
• Explain the above disadvantage to the customer when
activating this mode.
[1]
[2]
[3]
[4]
[5]
CAUTION:
Using this function can cause ink to leak inside the printer. After
taking the necessary measures, quickly replace with a new
Maintenance Cartridge.
Because ink may leak from the old Maintenance Cartridge, do not
ask the customer to dispose of it. Take it back to the service center
and dispose properly.