TSC CPX4P Series, Руководство по обслуживанию

Страница: 21 / 232

17

Initialization Sequence
This is electrical initialization performed when Printer is turned on.
Initialization is performed after completion of the hardware start process following power-on of Printer.
In Update mode, no operation is performed. In Service mode, only cleaning for initialization is not
performed.
Operations are described below in detail.
No. Operations Details
[1] Printer Controller PCB 3.3 V ON
Turns on the 3.3 V power supply for driving sensors.
[2] Printer Controller PCB 5 V ON Turns on the 5 V power supply for logic circuit, etc.
[3] Printhead 5 V ON Turns on the 5 V power supply for driving Printhead PCB.
[4] Motor-related 24 V ON
Turn on the 24 V power supply for driving various Motors.
[5] AD conversion start Starts AD conversion.
[6] Sensor monitoring start Starts monitoring of the sensors used to detect open/ closed
states of various Covers and presence/absence of ink.
[7] EEPROM check Checks the data stored in EEPROMs mounted on
Printheads and Ink Tank.
[8] Printhead AD conversion start Starts AD conversion of Printhead temperature.
[9] Temperature monitoring start Starts monitoring of a Printhead temperature error.
[10] Printhead Lifter Part initialization Determines Printhead and Purge Unit positions, and
checks a sensor error.
[11] Printhead 24V ON Turns on the 24 V power supply for driving Printhead PCB.
[12] Pump Unit initialization Determines Pump Unit position and checks a sensor error.
[13] Data saving
Saves the current Printer condition in the Flash ROM.
[14] Cleaning Performs cleaning during initialization. The degree of
cleaning varies depending on the time that has elapsed since
the previous cleaning, etc. This operation is performed only
in user mode.