TSC CPX4P Series, Руководство по обслуживанию

Страница: 146 / 232

142
Adjustment
Adjustment at Part Replacement
This section introduces necessary adjustment when replacing the following service parts.
Target Part Adjustment Item
Print Module
Image Position Adjustment (*1)
Various Adjustment values (*2) entry (labeled)
Printhead Image Position Adjustment (*1)
Purge Unit
Blade Reference Position adjustment (*3)
Purge Unit Position adjustment value entry (labeled)
Transport Unit
Vertical scale adjustment
Image position adjustment (*1)
Paper Guide Unit /
Paper Width Sensor
Paper Width Sensor adjustment
Printer Controller PCB
In the case, data in old PCB can be retrieved to PC
•
Retrieve the data from old PCB to PC
•
Replace Printer Controller PCB
•
Send the data from PC to new PCB
In the case, data in old PCB cannot be retrieved to PC
•
Serial number entry
• RTC (Real Time Clock) entry
• Various adjustment values (*4) entry (labeled)
• Paper Width Sensor adjustment
•
Discharge power adjustment
• Vertical scale adjustment
•
Image position adjustment
Power PCB Discharge power adjustment
(*1) Image position, vertical registration, horizontal registration
(*2) Head Wipe Position, Head Cap Position, Head Print Position, Purge Unit Wipe Position. These
adjustment values are indicated on labels.
(*3) Using Blade Position Adjustment Tool (included with service part)
(*4) Head Wipe Position, Head Cap Position, Head Print Position, Purge Unit Wipe Position, Head to Platen
Distance.
These adjustment values are indicated on labels.