M2 Nut
Mixture needle lever
26
M2-8
Cap screw
M2.3*45L
2
Screw attached
M2 Nut
M2.6-5
Bind screw
Servo horn
M2-8
Cap screw
5.7mm Ball
M2 Nut
1
Screw attached
Servo horn
5.7mm Ball
M2-8
Cap screw
M2.3*50L
50mm
about 32mm
about 78mm
1
Ball link-long(23mm)
45mm
about 22mm
about 68mm
2
Ball link-long(23mm)
Ball link-long(23mm)
5.7mm Ball
Both YS and OS mixture arms are provided.
Please use the appropriate set for your
application.
OS - Ø7.2
YS - Ø6.2
Not included
The rod's length varies depending on the servo. Adjust the length
according to the instructions and verift once fitted on the model.
Turn on the transmitter before installing the servo
rod, ensure the radio has a linear throttle/pitch curve
and the throttle is set to mid stick 50% travel. This
will enable close to equal travel limits for high/low
throttle.
Both JR and Futaba servo horns are
provided. Please use the appropriate
set for your application.
Futaba x 2
JR x 2
Futaba
JR
PWOER
Setup Tips
TSA
mo
del
Ball link-long(23mm)
3
M2 Nut
3
5.7mm Ball
3
M2-8 Cap screw
1
M2.6-5 Bind screw
31
T-020-01
T-021-00
T-024-00
Linkage Rod Assembly
Please apply loctite when
locking all metal screws .
Lo
ck
Parallel
Parallel
